vendor_oneplus_sm8250-common/proprietary/vendor/etc/cne/profileSlm.xml

240 lines
12 KiB
XML
Raw Permalink Normal View History

<?xml version="1.0" encoding="UTF-8"?>
<!--Copyright (c) 2020 Qualcomm Technologies, Inc.
All Rights Reserved.
Confidential and Proprietary - Qualcomm Technologies, Inc.-->
<AndsfPolicy><Andsf>
<Version>5.1</Version>
<Name>Test 1</Name>
<Ext>
<WQE>
<InterfaceManager>
<BQE_Disabled>true</BQE_Disabled>
<ICD_Disabled>true</ICD_Disabled>
<!-- Default bqe thresholds where no apIds are specified. -->
<BQE_Thresholds Id="128">
<RadioTechnology Type="CDMA2000">
<Threshold units="bps">0</Threshold>
</RadioTechnology>
<RadioTechnology Type="EVDO_0">
<Threshold units="bps">0</Threshold>
</RadioTechnology>
<RadioTechnology Type="EVDO_A">
<Threshold units="bps">0</Threshold>
</RadioTechnology>
<RadioTechnology Type="EVDO_B">
<Threshold units="bps">0</Threshold>
</RadioTechnology>
<RadioTechnology Type="EDGE">
<Threshold units="bps">0</Threshold>
</RadioTechnology>
<RadioTechnology Type="UMTS">
<Threshold units="bps">0</Threshold>
</RadioTechnology>
<RadioTechnology Type="HSPA">
<Threshold units="bps">0</Threshold>
</RadioTechnology>
<RadioTechnology Type="HSDPA">
<Threshold units="bps">0</Threshold>
</RadioTechnology>
<RadioTechnology Type="GPRS">
<Threshold units="bps">0</Threshold>
</RadioTechnology>
<RadioTechnology Type="LTE">
<Threshold units="bps">0</Threshold>
</RadioTechnology>
<RadioTechnology Type="EHRPD">
<Threshold units="bps">0</Threshold>
</RadioTechnology>
<RadioTechnology Type="HSPAP">
<Threshold units="bps">0</Threshold>
</RadioTechnology>
</BQE_Thresholds>
<Authentication>
<MaxAuthTime>60</MaxAuthTime>
<IcdBanRetest>3</IcdBanRetest>
<AuthApps>
<Appname>someauthapp1</Appname>
<Appname>someauthapp2</Appname>
<Appname>someauthapp3</Appname>
</AuthApps>
</Authentication>
<ICD config-type="disabled">
</ICD>
<TQE>
<!-- Default node for TQE_Thresholds element -->
<TQE_Thresholds Id="128">
<!-- Disabling Broken Backhaul Detector module -->
<BBD_Disabled>true</BBD_Disabled>
<!-- Disabling Degraded Backhaul Detector module -->
<DBD_Disabled>true</DBD_Disabled>
<!-- Threshold on downlink gap indicator metric -->
<DGIMThresh units="msecs">400</DGIMThresh>
<!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
<DBDTputThresh units="bps">1000000</DBDTputThresh>
<!-- Time window for TQE history -->
<TQETimeWindow units="secs">77</TQETimeWindow>
<!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
<RatioThresh>0.2</RatioThresh>
</TQE_Thresholds>
</TQE>
</InterfaceManager>
</WQE>
<CQE prodId="Rome">
<!-- Default node for CQE_Thresholds element -->
<CQE_Thresholds Id="128">
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
<!-- a candidate for interface selection -->
<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
<!-- a candidate for interface selection -->
<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
<!-- Interval over whcih RSSI values are averaged -->
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
<!-- Setting CQETimer to zero disables the CQE -->
<CQETimer units="secs">2</CQETimer>
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
<!-- Threshold for RX MPDU PER -->
<RMP_THR>1</RMP_THR>
<!-- Minimum MPDU count to activate RX MPDU PER -->
<RMP_CNT_THR>4</RMP_CNT_THR>
<!-- Cutoff RX MCS index -->
<RX_MCS_THR>9</RX_MCS_THR>
<!-- Cutoff RX BW index -->
<RX_BW_THR>3</RX_BW_THR>
<!-- Threshold for TX MSDU drop -->
<TMD_THR>1</TMD_THR>
<!-- Minimum MSDU count to activate TX MSDU drop -->
<TMD_CNT_THR>2</TMD_CNT_THR>
<!-- Threshold for MPDU retry rate -->
<TMR_THR>1</TMR_THR>
<!-- Minimum MPDU count to activate MPDU retry rate -->
<TMR_CNT_THR>50</TMR_CNT_THR>
<!-- Cutoff TX MCS index -->
<TX_MCS_THR>8</TX_MCS_THR>
<!-- Cutoff TX BW index -->
<TX_BW_THR>2</TX_BW_THR>
<!-- Maximum MPDU count to activate RX MPDU PER -->
<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
<!-- Maximum MPDU count to activate MPDU retry rate -->
<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
<!-- Threshold for PERAM -->
<PERAM_THR>1</PERAM_THR>
<!-- Minimum MPDU count to activate PERAM -->
<PERAM_CNT_THR>4</PERAM_CNT_THR>
<!-- Maximum MPDU count to activate PERAM -->
<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
<!-- CQE throughput Threshold-->
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
</CQE_Thresholds>
</CQE>
<CQE prodId="Helium">
<!-- Default node for CQE_Thresholds element -->
<CQE_Thresholds Id="128">
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
<!-- a candidate for interface selection -->
<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
<!-- a candidate for interface selection -->
<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
<!-- Interval over whcih RSSI values are averaged -->
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
<!-- Setting CQETimer to zero disables the CQE -->
<CQETimer units="secs">2</CQETimer>
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
<!-- Threshold for RX MPDU PER -->
<RMP_THR>1</RMP_THR>
<!-- Minimum MPDU count to activate RX MPDU PER -->
<RMP_CNT_THR>10</RMP_CNT_THR>
<!-- Cutoff RX MCS index -->
<RX_MCS_THR>9</RX_MCS_THR>
<!-- Cutoff RX BW index -->
<RX_BW_THR>3</RX_BW_THR>
<!-- Threshold for TX MSDU drop -->
<TMD_THR>1</TMD_THR>
<!-- Minimum MSDU count to activate TX MSDU drop -->
<TMD_CNT_THR>2</TMD_CNT_THR>
<!-- Threshold for MPDU retry rate -->
<TMR_THR>1</TMR_THR>
<!-- Minimum MPDU count to activate MPDU retry rate -->
<TMR_CNT_THR>100</TMR_CNT_THR>
<!-- Cutoff TX MCS index -->
<TX_MCS_THR>4</TX_MCS_THR>
<!-- Cutoff TX BW index -->
<TX_BW_THR>2</TX_BW_THR>
<!-- Maximum MPDU count to activate RX MPDU PER -->
<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
<!-- Maximum MPDU count to activate MPDU retry rate -->
<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
<!-- Threshold for PERAM -->
<PERAM_THR>1</PERAM_THR>
<!-- Minimum MPDU count to activate PERAM -->
<PERAM_CNT_THR>20</PERAM_CNT_THR>
<!-- Maximum MPDU count to activate PERAM -->
<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
<!-- CQE throughput Threshold-->
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
</CQE_Thresholds>
</CQE>
<CQE prodId="Pronto">
<!-- Default node for CQE_Thresholds element -->
<CQE_Thresholds Id="128">
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
<!-- a candidate for interface selection -->
<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
<!-- a candidate for interface selection -->
<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
<!-- RSSI threshold from which to select linear model to compute CQE metric -->
<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
<!-- Interval over whcih RSSI values are averaged -->
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
<!-- Setting CQETimer to zero disables the CQE -->
<CQETimer units="secs">2</CQETimer>
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
<FrameCntThreshold units="frames">8</FrameCntThreshold>
<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
<ColdStartThreshold units="frames">2</ColdStartThreshold>
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
<!-- such as retry, multi-retry, fail and ack fail metric -->
<!-- when average RSSI is greater than RSSIModelThreshold -->
<MACMibThreshold2a>1</MACMibThreshold2a>
<!-- The weightage that given to retry metric in computation of CQE -->
<!-- when average RSSI is greater than RSSIModelThreshold -->
<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
<!-- The weightage that given to multi-retry metric in computation of CQE -->
<!-- when average RSSI is greater than RSSIModelThreshold -->
<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
<!-- such as retry, multi-retry, fail and ack fail metric -->
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
<MACMibThreshold2b>1</MACMibThreshold2b>
<!-- The weightage that given to retry metric in computation of CQE -->
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
<!-- The weightage that given to multi-retry metric in computation of CQE -->
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
</CQE_Thresholds>
</CQE>
</Ext>
</Andsf></AndsfPolicy>