/********************************************************************************************************
 * @file    board_8278_dongle.h
 *
 * @brief   This is the header file for board_8278_dongle
 *
 * @author  Zigbee Group
 * @date    2021
 *
 * @par     Copyright (c) 2021, Telink Semiconductor (Shanghai) Co., Ltd. ("TELINK")
 *
 *          Licensed under the Apache License, Version 2.0 (the "License");
 *          you may not use this file except in compliance with the License.
 *          You may obtain a copy of the License at
 *
 *              http://www.apache.org/licenses/LICENSE-2.0
 *
 *          Unless required by applicable law or agreed to in writing, software
 *          distributed under the License is distributed on an "AS IS" BASIS,
 *          WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 *          See the License for the specific language governing permissions and
 *          limitations under the License.
 *******************************************************************************************************/

#pragma once

/* Enable C linkage for C++ Compilers: */
#if defined(__cplusplus)
extern "C" {
#endif


/*******************************************************************************************************
*********************8278Dongle with 48 Pins: Start*****************************************************
*******************************************************************************************************/
//KEY
#define	BUTTON1 					GPIO_PD6
#define PD6_FUNC					AS_GPIO
#define PD6_OUTPUT_ENABLE			0
#define PD6_INPUT_ENABLE			1
#define	PULL_WAKEUP_SRC_PD6			PM_PIN_PULLUP_10K

#define	BUTTON2 					GPIO_PD5
#define PD5_FUNC					AS_GPIO
#define PD5_OUTPUT_ENABLE			0
#define PD5_INPUT_ENABLE			1
#define	PULL_WAKEUP_SRC_PD5			PM_PIN_PULLUP_10K

//LED
/***************************************************************
* LED_R			GPIO_PA3	//D2 -- red			PWM1
* LED_G			GPIO_PA2	//D1 -- green		PWM0
* LED_B			GPIO_PB0	//D4 -- blue		PWM3
* LED_W			GPIO_PB1	//D5 -- white		PWM4
* LED_Y			GPIO_PA4	//D3 -- yellow		PWM2
****************************************************************/
#if defined COLOR_RGB_SUPPORT && (COLOR_RGB_SUPPORT == 1)

#define LED_R						GPIO_PA3	//D2 -- red			PWM1
#define LED_G						GPIO_PA2	//D1 -- green		PWM0
#define LED_B						GPIO_PB0	//D4 -- blue		PWM3

#define PWM_R_CHANNEL				1//PWM1
#define PWM_R_CHANNEL_SET()			do{	\
										gpio_set_func(LED_R, AS_PWM1); 		\
									}while(0)

#define PWM_G_CHANNEL				0//PWM0
#define PWM_G_CHANNEL_SET()			do{	\
										gpio_set_func(LED_G, AS_PWM0); 		\
									}while(0)

#define PWM_B_CHANNEL				3//PWM3
#define PWM_B_CHANNEL_SET()			do{	\
										gpio_set_func(LED_B, AS_PWM3); 		\
									}while(0)

#define R_LIGHT_PWM_CHANNEL			PWM_R_CHANNEL
#define G_LIGHT_PWM_CHANNEL			PWM_G_CHANNEL
#define B_LIGHT_PWM_CHANNEL			PWM_B_CHANNEL
#define R_LIGHT_PWM_SET()			PWM_R_CHANNEL_SET()
#define G_LIGHT_PWM_SET()			PWM_G_CHANNEL_SET()
#define B_LIGHT_PWM_SET()			PWM_B_CHANNEL_SET()

//LED_Y and LED_W as GPIO.
#define LED_Y						GPIO_PA4
#define LED_W						GPIO_PB1

#define PA4_FUNC					AS_GPIO
#define PA4_OUTPUT_ENABLE			1
#define PA4_INPUT_ENABLE			0

#define PB1_FUNC					AS_GPIO
#define PB1_OUTPUT_ENABLE			1
#define PB1_INPUT_ENABLE			0

#define LED_POWER					LED_W
#define LED_PERMIT					LED_Y

#else

//PWM configuration, LED_Y as warm light, LED_W as cool light.
#define LED_Y						GPIO_PA4	//D3 -- yellow		PWM2
#define LED_W						GPIO_PB1	//D5 -- white		PWM4

#define PWM_Y_CHANNEL				2//PWM2
#define PWM_Y_CHANNEL_SET()			do{	\
										gpio_set_func(LED_Y, AS_PWM2); 		\
									}while(0)

#define PWM_W_CHANNEL				4//PWM4
#define PWM_W_CHANNEL_SET()			do{	\
										gpio_set_func(LED_W, AS_PWM4); 		\
									}while(0)

#define WARM_LIGHT_PWM_CHANNEL		PWM_Y_CHANNEL
#define COOL_LIGHT_PWM_CHANNEL		PWM_W_CHANNEL
#define WARM_LIGHT_PWM_SET()		PWM_Y_CHANNEL_SET()
#define COOL_LIGHT_PWM_SET()		PWM_W_CHANNEL_SET()

//LED_R and LED_G as GPIO.
#define LED_R						GPIO_PA3
#define LED_G						GPIO_PA2

#define PA3_FUNC					AS_GPIO
#define PA3_OUTPUT_ENABLE			1
#define PA3_INPUT_ENABLE			0

#define PA2_FUNC					AS_GPIO
#define PA2_OUTPUT_ENABLE			1
#define PA2_INPUT_ENABLE			0

#define LED_POWER					LED_R
#define LED_PERMIT					LED_G

#endif

// UART
#if ZBHCI_UART
	#define UART_TX_PIN         	UART_TX_PD7
	#define UART_RX_PIN         	UART_RX_PA0

	#define UART_PIN_CFG()			uart_gpio_set(UART_TX_PIN, UART_RX_PIN);// uart tx/rx pin set
#endif

// DEBUG
#if UART_PRINTF_MODE
	#define	DEBUG_INFO_TX_PIN	    GPIO_PC6//print
#endif


enum{
	VK_SW1 = 0x01,
	VK_SW2 = 0x02
};

#define	KB_MAP_NORMAL	{\
		{VK_SW1,}, \
		{VK_SW2,}, }

#define	KB_MAP_NUM		KB_MAP_NORMAL
#define	KB_MAP_FN		KB_MAP_NORMAL

#define KB_DRIVE_PINS  {NULL }
#define KB_SCAN_PINS   {BUTTON1,  BUTTON2}


/* Disable C linkage for C++ Compilers: */
#if defined(__cplusplus)
}
#endif