/********************************************************************************************************
 * @file    board_826x_evk.h
 *
 * @brief   This is the header file for board_826x_evk
 *
 * @author  Zigbee Group
 * @date    2021
 *
 * @par     Copyright (c) 2021, Telink Semiconductor (Shanghai) Co., Ltd. ("TELINK")
 *
 *          Licensed under the Apache License, Version 2.0 (the "License");
 *          you may not use this file except in compliance with the License.
 *          You may obtain a copy of the License at
 *
 *              http://www.apache.org/licenses/LICENSE-2.0
 *
 *          Unless required by applicable law or agreed to in writing, software
 *          distributed under the License is distributed on an "AS IS" BASIS,
 *          WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 *          See the License for the specific language governing permissions and
 *          limitations under the License.
 *******************************************************************************************************/

#pragma once

/* Enable C linkage for C++ Compilers: */
#if defined(__cplusplus)
extern "C" {
#endif

//KEY
#define	BUTTON1 					GPIO_PD2
#define PD2_FUNC					AS_GPIO
#define PD2_OUTPUT_ENABLE			0
#define PD2_INPUT_ENABLE			1
#define	PULL_WAKEUP_SRC_PD2			PM_PIN_PULLUP_10K

#define	BUTTON2 					GPIO_PC7
#define PC7_FUNC					AS_GPIO
#define PC7_OUTPUT_ENABLE			0
#define PC7_INPUT_ENABLE			1
#define	PULL_WAKEUP_SRC_PC7			PM_PIN_PULLUP_10K

//LED
/***************************************************************
* LED_R		GPIO_PD5	//D4 -- red			PWM0
* LED_G		GPIO_PD6	//D2 -- green		PWM1
* LED_B		GPIO_PB4	//D1 -- blue		PWM4
* LED_W		GPIO_PD7	//D3 -- white		PWM2
****************************************************************/
#if defined COLOR_RGB_SUPPORT && (COLOR_RGB_SUPPORT == 1)

#define PD5_FUNC					AS_PWM
#define PD5_OUTPUT_ENABLE			1
#define PD5_INPUT_ENABLE			0

#define PD6_FUNC					AS_PWM
#define PD6_OUTPUT_ENABLE			1
#define PD6_INPUT_ENABLE			0

#define PB4_FUNC					AS_PWM
#define PB4_OUTPUT_ENABLE			1
#define PB4_INPUT_ENABLE			0

#define PWM_R_CHANNEL_SET()			PWM0_CFG_GPIO_D5()
#define PWM_R_CHANNEL				0//PWM0

#define PWM_G_CHANNEL_SET()			PWM1_CFG_GPIO_D6()
#define PWM_G_CHANNEL				1//PWM1

#define PWM_B_CHANNEL_SET()			PWM4_CFG_GPIO_B4()
#define PWM_B_CHANNEL				4//PWM4

#define R_LIGHT_PWM_CHANNEL			PWM_R_CHANNEL
#define G_LIGHT_PWM_CHANNEL			PWM_G_CHANNEL
#define B_LIGHT_PWM_CHANNEL			PWM_B_CHANNEL
#define R_LIGHT_PWM_SET()			PWM_R_CHANNEL_SET()
#define G_LIGHT_PWM_SET()			PWM_G_CHANNEL_SET()
#define B_LIGHT_PWM_SET()			PWM_B_CHANNEL_SET()

#define LED_W						GPIO_PD7

#define PD7_FUNC					AS_GPIO
#define PD7_OUTPUT_ENABLE			1
#define PD7_INPUT_ENABLE			0

#define LED_POWER					NULL
#define LED_PERMIT					LED_W

#else

//PWM configuration, LED_B as warm light, LED_W as cool light.
#define PB4_FUNC					AS_PWM
#define PB4_OUTPUT_ENABLE			1
#define PB4_INPUT_ENABLE			0

#define PD7_FUNC					AS_PWM
#define PD7_OUTPUT_ENABLE			1
#define PD7_INPUT_ENABLE			0

#define PWM_B_CHANNEL_SET()			PWM4_CFG_GPIO_B4()
#define PWM_B_CHANNEL				4//PWM4

#define PWM_W_CHANNEL_SET()			PWM2_CFG_GPIO_D7()
#define PWM_W_CHANNEL				2//PWM2

#define WARM_LIGHT_PWM_CHANNEL		PWM_B_CHANNEL
#define COOL_LIGHT_PWM_CHANNEL		PWM_W_CHANNEL
#define WARM_LIGHT_PWM_SET()		PWM_B_CHANNEL_SET()
#define COOL_LIGHT_PWM_SET()		PWM_W_CHANNEL_SET()

#define LED_R						GPIO_PD5
#define LED_G						GPIO_PD6

#define PD5_FUNC					AS_GPIO
#define PD5_OUTPUT_ENABLE			1
#define PD5_INPUT_ENABLE			0

#define PD6_FUNC					AS_GPIO
#define PD6_OUTPUT_ENABLE			1
#define PD6_INPUT_ENABLE			0

#define LED_POWER					LED_R
#define LED_PERMIT					LED_G

#endif

//UART
#if ZBHCI_UART
	#error please configurate uart PIN!!!!!!
#endif

//DEBUG
#if UART_PRINTF_MODE
	#define	DEBUG_INFO_TX_PIN	    GPIO_PC5//print
#endif


enum{
	VK_SW1 = 0x01,
	VK_SW2 = 0x02
};

#define	KB_MAP_NORMAL	{\
		{VK_SW1,}, \
		{VK_SW2,}, }

#define	KB_MAP_NUM		KB_MAP_NORMAL
#define	KB_MAP_FN		KB_MAP_NORMAL

#define KB_DRIVE_PINS  {NULL }
#define KB_SCAN_PINS   {BUTTON1,  BUTTON2}


/* Disable C linkage for C++ Compilers: */
#if defined(__cplusplus)
}
#endif